LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 861 (Engine Mechanical (Repair Instructions 2 Of 3) - 5.7L) >> Off-Vehicle Repair Instructions - Part 2 >> Cylinder Head Removal - Left

Cylinder Head Removal - Left

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cylinder Head & Bolts (Left)
    GM260146Courtesy of GENERAL MOTORS CORP.
  1. Remove the spark plugs from the cylinder head.
    2. IMPORTANT: The cylinder head bolts can NOT be used again. Install NEW cylinder head bolts during assembly.
  2. Remove the cylinder head bolts.
    3. NOTE: After removal, place the cylinder head on two wood blocks to prevent damage to the sealing surfaces.
  3. Remove the cylinder head.
    4. Fig 2: View Of Left Cylinder Head Gasket & Locator Pins
    GM63169Courtesy of GENERAL MOTORS CORP.
  4. Remove the gasket.
  5. Discard the gasket.
  6. Discard the cylinder head bolts.
scientia non olet · About LEMON Manuals