Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust Pipe Hanger Lower & Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the exhaust pipe hanger.
Install the upper exhaust pipe hanger bolts.
Tighten: Tighten the exhaust pipe hanger bolts to 50 N.m (37 lb ft).
Install the catalytic converter. Refer to Catalytic Converter Replacement .