LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 841 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Evaporator Drain Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: HVAC Module Drain Tube
    GM296218Courtesy of GENERAL MOTORS CORP.
  1. Install the HVAC module drain tube to the module.
    • Ensure that the drain tube is fully seated to the HVAC module.
    • Align the drain tube to contact the cowl as shown (1).
  2. Install the battery heat shield. Refer to Battery Heat Shield Replacement in Engine Electrical.
  3. Install the battery. Refer to Battery Replacement in Engine Electrical.
scientia non olet · About LEMON Manuals