Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install the radiator air baffle (1).
- Connect the radiator air baffle connectors (3).
- Connect the hood light and air temperature sensor electrical connectors.
- Raise the vehicle.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the radiator air baffle lower bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Lower the vehicle.
- Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 5.7L.