LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 840 (Engine Cooling System -- 5.7L) >> Repair Instructions >> Cooling Fan Motor Replacement - Electric >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fan Motor & Bolts
    GM342295Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the fan motor to the shroud.
  2. Install the fan motor bolts.

    Tighten:  Tighten the bolts to 6 N.m (53 lb in).

  3. Install the cooling fan. Refer to Cooling Fan Replacement - Electric .