LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 840 (Engine Cooling System -- 5.7L) >> Repair Instructions >> Coolant Air Bleed Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Coolant Air Bleed Hose At Throttle Body
    GM220621Courtesy of GENERAL MOTORS CORP.
  1. Reposition the coolant air bleed hose clamp at the throttle body.
  2. Remove the coolant air bleed hose from the throttle body.
    3. Fig 2: Coolant Air Bleed Hose & Pipe
    GM639610Courtesy of GENERAL MOTORS CORP.
  3. Reposition the coolant air bleed hose clamp at the pipe.
  4. Remove the coolant air bleed hose (2) from the pipe (1).
scientia non olet · About LEMON Manuals