LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 830 (Folding Roof System) >> Repair Instructions >> Folding Top Stowage Compartment Lid Protector >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Folding Top Stowage Compartment Lid Protector/Molding
    GM213986Courtesy of GENERAL MOTORS CORP.
  1. Using a heat gun heat the protector/molding to soften the adhesive.
  2. Lift upward to remove the protector.
  3. Remove all old adhesive from the lid depression by using 3M™ adhesive remover P/N 8984 or equivalent.
  4. Clean the surface with a 50/50 mixture of isopropyl alcohol and water.
  5. Dry the surface with a clean cloth.
scientia non olet · About LEMON Manuals