LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 828 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Energy Absorber At Impact Bar Bolts And Spacers
    GM63723Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear fascia. Refer to Fascia Replacement - Rear Bumper  .
  2. Remove energy absorber to impact bar bolts and spacers.
  3. Remove the energy absorber.
scientia non olet · About LEMON Manuals