LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 825 (Body Front End) >> Repair Instructions >> Seal Replacement - Fender to Hood >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seal At Fender
    GM71283Courtesy of GENERAL MOTORS CORP.
  1. Remove the seal from the fender.
  2. Clean the seal to fender contact surface.