Conditions for Setting the DTC

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

DTC B0016 will set when the I/P module deployment loop resistance is less than 1.3 ohms for 300 milliseconds.
DTC B0017 will set when one of the following conditions occur:
- I/P module high circuit is less than 2 volts and the I/P module deployment loop resistance is more than 3.7 ohms for 300 milliseconds.
- I/P module deployment loop resistance is more than 6 ohms for 300 milliseconds.
DTC B0018 will set when one of the following conditions occur:
- I/P module high circuit is more than 6 volts for 300 milliseconds.
- I/P module high circuit is less than 2 volts and I/P module deployment loop resistance is less than 6 ohms for 300 milliseconds.