Removal & Installation (3.8L)
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
Turn OFF the ignition. Reposition the pinch clamp from the valve end of the hose. Disconnect the vacuum line from the valve. See Fig 1. Remove the Secondary Air Injection (AIR) pipe fasteners. Remove the fastener that secures the valve to the bracket. Remove the valve and pipe assembly from the vehicle. To install, reverse removal procedure.