LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Controls - Removal & Installation, Overhaul) >> Emission Systems & Sub-Systems >> EGR Valve Pipe >> Removal (3.8L - Inlet Pipe)

Removal (3.8L - Inlet Pipe)

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The EGR valve inlet pipe may also be referred to as the EGR valve adapter pipe.
  1. Remove the Exhaust Gas Recirculation (EGR) valve. See EGR VALVE . If applicable, remove the Secondary Air Injection (AIR) pump outlet pipe. See SECONDARY AIR INJECTION PUMP OUTLET PIPE/HOSE .
  2. Remove the EGR valve outlet pipe. See REMOVAL & INSTALLATION (3.8L - OUTLET PIPE) . Remove the EGR valve inlet pipe mounting bolt from the exhaust manifold. See Figure. Remove the mounting bolt, and the stud from the EGR valve inlet pipe bracket. Remove the EGR valve inlet pipe assembly.
scientia non olet · About LEMON Manuals