LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Body Rear End) >> Repair Instructions >> Reveal Molding Replacement - Lock Pillar Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Weatherstrip At Lock Pillar Retainer
    GM376671Courtesy of GENERAL MOTORS CORP.
  1. Remove the door window weatherstrip.
    2. Fig 2: Door Window Weatherstrip Retainer
    GM376672Courtesy of GENERAL MOTORS CORP.
  2. Remove the door window weatherstrip retainer.
    3. Fig 3: Lock Pillar Weatherstrip Retainer
    GM416776Courtesy of GENERAL MOTORS CORP.
  3. Remove the lock pillar weatherstrip retainer screws (1).
  4. Remove the lock pillar weatherstrip retainer.
  5. Remove the lock pillar upper reveal molding (2).
  6. Clean the mounting surfaces.
scientia non olet · About LEMON Manuals