LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Body Rear End) >> Repair Instructions >> Brake Caliper Cooling Duct Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheelhouse Panel & Brake Caliper Cooling Duct
    GM721300Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the wheelhouse panel. Refer to Wheelhouse Panel Replacement .
  4. Remove the brake caliper cooling duct.
    5. Fig 2: Brake Caliper Cooling Air Scoop Nuts
    GM721302Courtesy of GENERAL MOTORS CORP.
  5. Remove the 4 brake caliper cooling air scoop nuts.
    6. Fig 3: Brake Caliper Cooling Air Scoop
    GM721304Courtesy of GENERAL MOTORS CORP.
  6. Remove the brake caliper cooling air scoop.
scientia non olet · About LEMON Manuals