LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 811 (Instrument Panel System Displays, Gauges And Console) >> Diagnostic Information and Procedures >> Engine Oil Pressure Gage Inaccurate or Inoperative

Engine Oil Pressure Gage Inaccurate or Inoperative

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Engine Oil Pressure Gage Inaccurate or Inoperative

Step Action Yes No
Schematic Reference: Instrument Cluster Schematics 
1 Did you perform the Instrument Panel Cluster (IPC) Diagnostic System Check? Go to Step 2  Go to Symptoms - Instrument Panel, Gages and Console 
2
  1. Install a scan tool.
  2. Start the engine.
  3. With the scan tool, perform the IPC Gages Oil Pressure Gage Sweep Test.
Does the engine oil pressure gage move up and down when commanded?		 Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems Go to Step 3 
3 Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement .
Did you complete the replacement?		 Go to Step 4  -
4 Operate the system in order to verify the repair.
Did you correct the condition?		 System OK Go to Step 2 
scientia non olet · About LEMON Manuals