Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
- Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure .
- Drain the fuel tanks below the level of the fuel tank crossover hose. Refer to Fuel Tank Draining Procedure .
- For vehicles equipped with automatic transmission, remove the left and right muffler. Refer to Muffler Replacement - Right , and to Muffler Replacement - Left in Engine Exhaust.
- Disconnect the tank crossover hose (5) at the right fuel tank and the left fuel tank.
- Disconnect the evaporative emission (EVAP) pipe (2) at the right tank EVAP pipe (3) and the left tank EVAP pipe (1).
- Remove the rear EVAP pipe (2).
- Cap the open pipes in order to prevent possible contamination.