Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inspecting Transmission Fluid Level Is Even Bottom Of Fill Plug Hole

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the transmission fluid temperature sensor.
Tighten: Tighten the transmission fluid temperature sensor to 27 N.m (20 lb ft).

Fig 2: TFT Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the transmission fluid temperature sensor electrical connector.
Lower the vehicle.