LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Engine Controls - Removal & Installation & Overhaul) >> Fuel Systems >> Fuel Level Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel sender assembly from fuel tank. See FUEL SENDER ASSEMBLY . Remove the fuel level sensor electrical connector retaining clip. Disconnect the fuel level sensor electrical connector from under the fuel sender cover.
  2. Disconnect the fuel pump electrical connector. Remove the fuel level sensor from the fuel sender assembly. See Fig 1. To install, reverse removal procedure.
Fig 1: Identifying Fuel Sender Assembly Components
G00132264Courtesy of GENERAL MOTORS CORP.