LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Engine Controls - Removal & Installation & Overhaul) >> Fuel Systems >> Fuel Filler Tube >> Installation

Fuel Filler Tube: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel filler pipe and hose to the fuel tank. Fully seat the fill hose to the stop on the tank. Tighten the fuel filler pipe clamp to specification. See TORQUE SPECIFICATIONS .
  2. Install the fuel filler pipe attaching screw to the wheelhouse panel. Tighten the fuel filler pipe attaching screw to specification. Install the fuel filler pipe attaching nut to the wheelhouse panel. Tighten the fuel filler pipe attaching nut to specification. Install the fuel filler pipe shield. Lower the vehicle. Install the fuel filler pipe to fuel fill pocket bolts. Refill the fuel tank. Install the fuel filler cap. Connect the negative battery cable. Inspect for fuel leaks.
Fig 1: Removing/Installing Fuel Filler Pipe Shield
G00114765Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Fuel Tank Filler Pipe
G00114766Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals