LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Engine Controls - Removal & Installation & Overhaul) >> Emission Systems & Sub-Systems >> EGR Valve >> Removal

EGR Valve: Removal

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn OFF the ignition. Disconnect the EGR valve electrical connector. See Figure. Remove the oil indicator from the filler tube. Remove the air cleaner assembly. Remove the retaining nut from the EGR valve at the top of the filler tube.
  2. Remove the lower retaining bolt at the base of the filler tube. Remove the fluid filler tube. Remove the fluid filler tube seal. Remove the bolt retaining the pipe assembly from the EGR valve and carefully pull the pipe assembly back. Remove the EGR valve retaining bolts. Remove the EGR valve assembly. Remove the gasket. Clean the EGR valve mating surface.
scientia non olet · About LEMON Manuals