Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Position the wiper motor cover to the wiper motor.NOTE: Refer to FASTENER NOTICE .
- Install the wiper motor cover screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Install the wiper motor. Refer to Wiper Motor Replacement .
- Inspect the wipers for proper operation.