LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (Wiper System And Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the hook of the wiper arm through the opening in the wiper blade.
    Fig 1: Installing Wiper Arm & Wiper Blade
    G01813077Courtesy of GENERAL MOTORS CORP.
  2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  3. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  4. Inspect the wipers for proper operation.
    Fig 2: Installing Wiper Blade Clip Button
    G01813078Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals