Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Insert the hook of the rear wiper arm through the opening in the rear wiper blade.

Fig 1: Installing Rear Wiper Arm
Courtesy of GENERAL MOTORS CORP.
Position the rear wiper blade pivot into the inside radius of the rear wiper arm hook.
Pull the rear wiper blade pivot into the rear wiper arm hook until the pivot locks into the hook.
Inspect the rear wiper for proper operation.

Fig 2: Installing Rear Wiper Blade
Courtesy of GENERAL MOTORS CORP.