LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 793 (Lighting Systems) >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement (Pontiac) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Install the flasher/shock sensor to the extension bracket.
    Fig 1: Installing Flasher/Shock Sensor
    G01812948Courtesy of GENERAL MOTORS CORP.