Removal Procedure
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the IP accessory trim plate. Refer to Trim Plate Replacement - IP Accessory .
- Push up on the ashtray guide tension spring on both sides of the ashtray.
- Push up on the metal housing center ashtray retaining tab.
- Pull the ashtray out of the IP accessory trim plate.
- Disconnect the electrical connectors.
- Remove the ashtray from the IP accessory trim plate.