Shift Lever - Assemble - Off Vehicle
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shift lever seal (2) onto the shift lever assembly (4).NOTE: Refer to FASTENER NOTICE .
- Install the shift lever assembly (4) into the linear shift assembly and secure it with a shift lever screw (3).
Tighten
Tighten the screw to 20 N.m (27 lb ft).
- Install the upper and lower trim covers. Refer to STEERING COLUMN TRIM COVERS - Assemble - Off Vehicle .
- Enable the inflatable restraint steering wheel module. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .