LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 781 (Heating, Ventilation & Air Conditioning) >> Repair Instructions >> Heater Pipe Adapter Replacement - Outlet (3.8L) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the O-ring.
  2. Install the heater outlet adapter pipe.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the heater outlet adapter pipe mounting bolt.

    Tighten 

    Tighten the bolt to 6 N.m (53 lb in).

    Fig 1: Heater Outlet Adapter Pipe & Mounting Bolt
    G01672740Courtesy of GENERAL MOTORS CORP.
  4. Install the heater outlet hose to the pipe adapter.
  5. Use J 38185  in order to secure the heater core hose clamp.
  6. Install the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT (L36) or FUEL INJECTOR SIGHT SHIELD REPLACEMENT (L67) .
  7. Refill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM .
    Fig 2: Heater Outlet Hose
    G01672741Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals