LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine Controls - Removal, Overhaul & Installation) >> Engine Sensors & Switches >> Mass Airflow/Intake Air Temperature Sensor >> Removal & Installation (4.0L)

Removal & Installation (4.0L)

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the MAF/IAT sensor electrical connector. Remove the clamps securing the MAF/IAT sensor assembly to the air cleaner and intake air duct. Carefully remove the MAF/IAT sensor from the air cleaner and intake air duct. To install, reverse removal procedure.