Conditions for Setting the DTC
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
DTC P1860 sets when one of the following conditions exists for at least 5 seconds:
- The PCM commands the solenoid to greater than 90% duty cycle and the voltage feedback remains high, B+.
- The PCM commands the solenoid to less than 10% duty cycle and the voltage feedback remains low, 0 volts.