Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Important: Avoid damaging the bucket seat cushion cover when removing the rear bucket seat buckle side belts.

Separate the seat cushion cover away from the buckle side belt in order to expose the bolt.
Use the J 29843-9 in order to remove the bolt securing the buckle side belt from the seat.
Remove the buckle side belt from the seat.

Fig 1: Removing Buckle Side Belt From Seat
Courtesy of GENERAL MOTORS CORP.