LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Rear (Bucket Seat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the buckle side belt to the seat.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Use the J 29843-9  in order to install the bolt securing the rear seat bucket side belt to the seat.

    Tighten

    Tighten the rear seat buckle belt bolt to 53 N.m (39 lb ft).

  3. Install the cushion cover down over the buckle side belt bolt.
    Fig 1: Installing Buckle Side Belt To Seat
    G01533719Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals