LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 775 (Body Rear End) >> Repair Instructions >> Wedge Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove screw from liftgate wedge bumper.
  3. Remove liftgate wedge bumper from the vehicle.
    Fig 1: Removing Screw From Liftgate Wedge Bumper
    G01533419Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals