LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 775 (Body Rear End) >> Repair Instructions >> Hinge Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate. Refer to LIFT GATE REPLACEMENT   . 
  2. Remove the headliner. Refer to HEADLINER REPLACEMENT  in Interior Trim.
  3. Use a grease pencil to mark the liftgate hinge position to the body.
  4. Remove the hinge retaining nuts from the vehicle roof.
  5. Remove the hinge from the vehicle.
    Fig 1: Removing Lift Gate Hinge Nuts From Vehicle
    G01533404Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals