LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 774 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Sliding Door >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the sliding door garnish molding clips to the holes in the sliding door.
  2. Install the sliding door garnish molding to the sliding door.
  3. Firmly press the sliding door garnish molding in order to secure the clips to the holes in the door.
    Fig 1: Installing Sliding Door Garnish Molding To Sliding Door
    G01533307Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals