LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 773 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to SIR CAUTION in Cautions and Notices.
  1. Disconnect the front seat SIR module electrical connector.
  2. Disconnect the front seat pretensioner electrical connector.
  3. Remove the finish cover screws.
  4. Remove the finish cover from the seat adjuster.
  5. Remove the adjuster switch from the finish cover.
  6. Disconnect the adjuster switch electrical connector.
    Fig 1: Removing Adjuster Switch From Finish Cover
    G01531950Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals