LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 773 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fasten the seat cushion support to the frame.
  2. Install the seat cushion frame to the seat cushion pad.
  3. Install the seat cushion cover. Refer to SEAT CUSHION COVER REPLACEMENT - FRONT   . 
    Fig 1: Installing Front Seat Cushion Support To Frame
    G01531929Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals