LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 773 (Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the map pocket net attachment, if equipped. Refer to MAP POCKET NET REPLACEMENT - FRONT SEAT   . 
  2. Remove the cup holder, if equipped. Refer to CUPHOLDER REPLACEMENT - FRONT SEAT   . 
  3. Remove the finish cover screws.
  4. Unsnap the front seat adjuster switch from the finish cover, if equipped.
  5. Remove the finish covers from the front seat frame.
    Fig 1: Removing Front Seat Adjuster Switch From Finish Cover
    G01531944Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals