LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 772 (Body Front End) >> Repair Instructions >> Seal Replacement - Hood Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hood rear weather-strip to the pinch-weld flange.
  2. Press the hood rear weather-strip onto the pinch-weld flange.
  3. Close the hood.
    Fig 1: Hood Rear Weather-Strip
    G01616919Courtesy of GENERAL MOTORS CORP.