LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 772 (Body Front End) >> Repair Instructions >> Brace Replacement - Sheet Metal Diagonal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the electrical harness from the sheet metal diagonal brace.
  3. Remove the bolt that holds the front sheet metal diagonal brace to the inner fender.
  4. Remove the bolts that hold the front sheet metal diagonal brace to the radiator support.
  5. Remove the front sheet metal diagonal brace.
    Fig 1: Sheet Metal Diagonal Braces
    G01616910Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals