LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 769 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the front energy absorber to the front bumper fascia and push in to lock into place.
  2. Install the front bumper fascia. Refer to FASCIA REPLACEMENT - FRONT BUMPER (PONTIAC)   or FASCIA REPLACEMENT - FRONT BUMPER (CHEVROLET)   .
    Fig 1: Aligning Front Energy Absorber To Front Bumper Fascia
    G01533202Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals