Cruise Control Disengaged
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
The cruise control release switch and stop lamp switch are used to disengage the cruise control. A release switch assembly and a stop lamp switch assembly are mounted on the brake pedal bracket. To disengage the system the driver presses the brake pedal. The speed of the vehicle at brake actuation will be stored in the memory of the cruise module. The cruise control module uses that stored speed when the cruise control system operation is resumed.