Conditions for Setting the DTC
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
The BCM will set DTC 8 whenever the BCM detects a lack of communication with the RCDLR, including any of the following conditions:
- The RCDLR B+ supply is open or shorted to ground.
- The RCDLR ground circuit is open or has high resistance.
- The BCM detects an open in the keyless entry serial data circuit.
- The BCM detects a short to ground in the keyless entry serial data circuit.
- The BCM detects a short to voltage in the keyless entry serial data circuit.