LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (Instrument Panel, Gages, And Console) >> Repair Instruction >> Power Accessory Port Replace - Front Floor Console >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a flat-bladed tool, unclip the bezel from the floor console.
  2. Disconnect the electrical connectors from the ports in the bezel.
  3. Remove the floor console bezel cover.
    Fig 1: Removing Floor Console Bezel Cover
    G01534546Courtesy of GENERAL MOTORS CORP.