LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (Instrument Panel, Gages, And Console) >> Repair Instruction >> Lock Cylinder Replacement - Instrument Panel (I/P) Compartment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the IP compartment latch. Refer to LATCH REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT  .
  2. Set the IP compartment latch fork bolt in the up position.
  3. Insert the key into the IP compartment lock cylinder.
  4. Rotate the IP compartment lock cylinder clockwise to the 3 o'clock position with the key.
  5. With the key in position, apply a light load and depress the retainer tumbler through the poke hole at the right hand side of the IP compartment latch.
  6. Rotate the key until the IP compartment lock cylinder rotates to about the 5 o'clock position. This will line up the notch at the rear of the IP compartment lock cylinder with the tab in the IP compartment latch housing.
  7. Remove the following components from the IP compartment latch:
scientia non olet · About LEMON Manuals