Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Position the cigarette lighter port retainer, placing the key to the slot into the power accessory port hole.
- Install the cigarette lighter port retainer by pressing into place until fully seated.
- Connect the electrical connector to the front console cigarette lighter socket.
- Position the cigarette lighter socket to the retainer.
- Install the cigarette lighter socket into the front console. Press into place until fully seated.
- Install the cigarette lighter fuse.
- Inspect the cigarette lighter for proper operation.