LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 762 (Body Control System) >> Diagnostic Information and Procedures >> On-Board Diagnostic Features >> Exiting Diagnostics

Exiting Diagnostics

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Perform the following procedure in order to exit the BCM diagnostics mode and return to normal BCM operation:

  1. Turn the ignition switch to the LOCK position.
  2. Reinstall the BCM PRGRM fuse.
  3. Turn the ignition switch to the RUN position.
scientia non olet · About LEMON Manuals