Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use tape on the tool surface so that you do not damage the paint on the antenna mast.
- Unscrew the antenna mast.
- Remove the mast from the antenna base.
- Unscrew the locking nut from the base in order to release the base from the fender.
- Remove the base from the fender.
- Disconnect the antenna lead.