Digital Radio Receiver Setup

Important:  The Digital Radio Receiver Setup option does not contain a submenu. Digital Radio Receiver Setup will configure the following system:

• DTCs
• Class 2 radio messages

For the Digital Radio Receiver, complete the following procedure, with the key in the ON position use a scan tool, in order to properly set up communication:

1. At the Main Menu screen, select Diagnostics.
2. At the Vehicle Identification screen, select the following options:
   1. Model Year
   2. Vehicle Line
3. At the System Selection Menu screen, select Body.
4. At the Vehicle identification screen select the following:
   • Platform Type
   • Body Type
5. At the Body screen, select Digital Radio Receiver.
6. Select Special Functions.
7. At the Special Functions screen, select DRR Setup.
   Fig 1: Speaker Replacement Reference Chart

   Courtesy of GENERAL MOTORS CORP.