Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Mark the position of rear wiper blade on the rear window with tape or an erasable marker.
- Remove the rear wiper arm nut cap.
- Remove the rear wiper arm nut.
- Using the J 39822 , remove the rear wiper arm.
- Remove the rear wiper blade from the rear wiper arm. Refer to WIPER ARM BLADE REPLACEMENT - REAR .