LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 759 (Wiper System And Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the ACCY position.
  2. Set the wiper switch to the PULSE position.
  3. Turn off the ignition when the wipers are in the innerwipe position and not moving.
  4. Press the wiper blade clip button in and remove the wiper blade from the inside radius of the wiper arm.
    Fig 1: Removing Wiper Blade From Inside Radius Of Wiper Arm
    G01534184Courtesy of GENERAL MOTORS CORP.
  5. Remove the wiper arm out through the opening in the wiper blade.
    Fig 2: Removing Wiper Arm Out Through Opening In Wiper Blade
    G01534185Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals